Laser cut Ply Double T-Trak Diorama module. Easy assmbly with only tape and glue.
Holes in the top match up to Katos Straight track 20-000 and 20-050 for the straight and 20-110 for the curve (Not included) for a precise fit.
The required straight section of track is 597 mm long. This is not a natural length for straight Kato Unitrack. The typical track arrangements consist of two 248 mm straight sections with either an extendable track piece (Kato 20050) or a custom cut piece of track for the 101 mm remaining track length. The curves consist of four pieces of r282-45o.
Included in this kit is
1 x front
2 x sides
1 x back
1 x top
4 x leg corners
4 x Set screws
4 x feet for set screws
You will need
Wood Glue, or glue of your choice
Blue Tape or tape of your choice.
1/8” hex key,
6mm hex key,
4 x 20-010, 2 x 20-000, 1 x 20-050 Kato track not included